FOUNDRY-SN-POS-GROUP-MIB DEFINITIONS::=BEGIN-- Foundry POS Group MIB Release 1.0.0
-- Revision 0 10/28/99-- Copyright 1996-1999 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.-- SECTION 1: Top Level Definitions-- ImportsIMPORTSCounter,GaugeFROM RFC1155-SMI
OBJECT-TYPEFROM RFC-1212
snPOS
FROM FOUNDRY-SN-ROOT-MIB;-- textual conventions-- maximum of ports are 32.-- Status ValuesPOSStatus ::=INTEGER{ disabled(0), enabled(1)}DisplayString::=OCTETSTRING-- This data type is used to model textual information taken-- from the NVT ASCII character set. By convention, objects-- with this syntax are declared as having---- SIZE (0..255)snPOSInfo OBJECTIDENTIFIER::={ snPOS 1}
-- POS Port table informationsnPOSInfoTable OBJECT-TYPESYNTAXSEQUENCEOF SnPOSInfoEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"A specific snPOSInfo group consists of a number of
switch ports. "::={ snPOSInfo 1}snPOSInfoEntry OBJECT-TYPESYNTAX SnPOSInfoEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the snPOSInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPOSInfoTable requires the entired
sequence of the MIB Objects in each
snPOSInfoEntry stored in one PDU. Otherwise,
GENERR return-value will be returned."INDEX{
snPOSInfoPortNum
}::={ snPOSInfoTable 1}
SnPOSInfoEntry ::=SEQUENCE{
snPOSInfoPortNum
INTEGER,
snPOSIfIndex
INTEGER,
snPOSDescr
DisplayString,
snPOSName
DisplayString,
snPOSInfoSpeed
INTEGER,
snPOSInfoAdminStatus
INTEGER,
snPOSInfoLinkStatus
INTEGER,
snPOSInfoClock
INTEGER,
snPOSInfoLoopBack
INTEGER,
snPOSInfoScrambleATM
POSStatus,
snPOSInfoFraming
INTEGER,
snPOSInfoCRC
INTEGER,
snPOSInfoKeepAlive
INTEGER,
snPOSInfoFlagC2
INTEGER,
snPOSInfoFlagJ0
INTEGER,
snPOSInfoFlagH1
INTEGER,
snPOSStatsInFrames
Counter,
snPOSStatsOutFrames
Counter,
snPOSStatsAlignErrors
Counter,
snPOSStatsFCSErrors
Counter,
snPOSStatsFrameTooLongs
Counter,
snPOSStatsFrameTooShorts
Counter,
snPOSStatsInDiscard
Counter,
snPOSStatsOutDiscard
Counter,
snPOSInOctets
OCTETSTRING,
snPOSOutOctets
OCTETSTRING,
snPOSStatsInBitsPerSec
Gauge,
snPOSStatsOutBitsPerSec
Gauge,
snPOSStatsInPktsPerSec
Gauge,
snPOSStatsOutPktsPerSec
Gauge,
snPOSStatsInUtilization
INTEGER(0..10000),
snPOSStatsOutUtilization
INTEGER(0..10000),
snPOSTagType
INTEGER}snPOSInfoPortNum OBJECT-TYPESYNTAXINTEGERACCESSread-onlySTATUSmandatoryDESCRIPTION"The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."::={ snPOSInfoEntry 1}snPOSIfIndex OBJECT-TYPESYNTAXINTEGERACCESSread-onlySTATUSmandatoryDESCRIPTION"In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573."
::={ snPOSInfoEntry 2}snPOSDescr OBJECT-TYPESYNTAXDisplayStringACCESSread-onlySTATUSmandatoryDESCRIPTION"A textual string containing the slot/port information
about the interface."::={ snPOSInfoEntry 3}snPOSName OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))ACCESSread-writeSTATUSmandatoryDESCRIPTION"Port Name string."::={ snPOSInfoEntry 4}snPOSInfoSpeed OBJECT-TYPESYNTAXINTEGER{s155000(1),s622000(2),other(3),s2488000(4)}ACCESSread-writeSTATUSmandatory
DESCRIPTION"The speed configuration for a port. The values are:
155000
622000
2488000
"::={ snPOSInfoEntry 5}snPOSInfoAdminStatus OBJECT-TYPESYNTAXINTEGER{up(1),-- ready to pass packetsdown(2),testing(3)-- in some test mode}ACCESSread-writeSTATUSmandatoryDESCRIPTION"The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)"::={ snPOSInfoEntry 6}snPOSInfoLinkStatus OBJECT-TYPESYNTAXINTEGER{up(1),-- ready to pass packetsdown(2),testing(3)-- in some test mode
}ACCESSread-onlySTATUSmandatoryDESCRIPTION"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)"::={ snPOSInfoEntry 7}snPOSInfoClock OBJECT-TYPESYNTAXINTEGER{internal(1),line(2)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"Clock default internal"::={ snPOSInfoEntry 8}snPOSInfoLoopBack OBJECT-TYPESYNTAXINTEGER{line(1),internal(2),none(3)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"Loop back default none"::={ snPOSInfoEntry 9}
snPOSInfoScrambleATM OBJECT-TYPESYNTAX POSStatus
ACCESSread-writeSTATUSmandatoryDESCRIPTION"ATM style scrambling default off"::={ snPOSInfoEntry 10}snPOSInfoFraming OBJECT-TYPESYNTAXINTEGER{sonet(1),sdh(2)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"Framing default SONET"::={ snPOSInfoEntry 11}snPOSInfoCRC OBJECT-TYPESYNTAXINTEGER{crc32bits(1),crc16bits(2)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"CRC default 32 bit"::={ snPOSInfoEntry 12}snPOSInfoKeepAlive OBJECT-TYPE
SYNTAXINTEGER(0..32767)ACCESSread-writeSTATUSmandatoryDESCRIPTION"Keep-alive default 10"::={ snPOSInfoEntry 13}snPOSInfoFlagC2 OBJECT-TYPESYNTAXINTEGER(0..255)ACCESSread-writeSTATUSmandatoryDESCRIPTION"C2 flag"::={ snPOSInfoEntry 14}snPOSInfoFlagJ0 OBJECT-TYPESYNTAXINTEGER(0..255)ACCESSread-writeSTATUSmandatoryDESCRIPTION"J0 flag"::={ snPOSInfoEntry 15}snPOSInfoFlagH1 OBJECT-TYPESYNTAXINTEGER(0..255)ACCESSread-write
STATUSmandatoryDESCRIPTION"H1 flag"::={ snPOSInfoEntry 16}snPOSStatsInFrames OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"The total number of packets received on the interface."::={ snPOSInfoEntry 17}snPOSStatsOutFrames OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"The total number of packets transmitted out of the interface."::={ snPOSInfoEntry 18}snPOSStatsAlignErrors OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."::={ snPOSInfoEntry 19}snPOSStatsFCSErrors OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."::={ snPOSInfoEntry 20}snPOSStatsFrameTooLongs OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."::={ snPOSInfoEntry 21}snPOSStatsFrameTooShorts OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION" A count of frames received on a particular
interface that below the minimum permitted
frame size."::={ snPOSInfoEntry 22}snPOSStatsInDiscard OBJECT-TYPESYNTAXCounterACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."::={ snPOSInfoEntry 23}snPOSStatsOutDiscard OBJECT-TYPESYNTAXCounterACCESSread-only
STATUSmandatoryDESCRIPTION"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."::={ snPOSInfoEntry 24}snPOSInOctets OBJECT-TYPESYNTAXOCTETSTRING(SIZE(8))ACCESSread-onlySTATUSmandatoryDESCRIPTION"The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."::={ snPOSInfoEntry 25}snPOSOutOctets OBJECT-TYPESYNTAXOCTETSTRING(SIZE(8))ACCESSread-onlySTATUSmandatoryDESCRIPTION"The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."
::={ snPOSInfoEntry 26}snPOSStatsInBitsPerSec OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of bits per second received on the interface
over a 5 minutes interval."::={ snPOSInfoEntry 27}snPOSStatsOutBitsPerSec OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of bits per second transmitted out of the interface
over a 5 minutes interval."::={ snPOSInfoEntry 28}snPOSStatsInPktsPerSec OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of packets per second received on the interface
over a 5 minutes interval."::={ snPOSInfoEntry 29}snPOSStatsOutPktsPerSec OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatory
DESCRIPTION"The number of packets per second transmitted out of the interface
over a 5 minutes interval."::={ snPOSInfoEntry 30}snPOSStatsInUtilization OBJECT-TYPESYNTAXINTEGER(0..10000)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The input network utilization in hundredths of a percent
over a 5 minutes interval."::={ snPOSInfoEntry 31}snPOSStatsOutUtilization OBJECT-TYPESYNTAXINTEGER(0..10000)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The output network utilization in hundredths of a percent
over a 5 minutes interval."::={ snPOSInfoEntry 32}snPOSTagType OBJECT-TYPESYNTAXINTEGER{tagged(1),untagged(2)}
ACCESSread-onlySTATUSmandatoryDESCRIPTION"For tagged port, we could have multiple VLANs
per port."::={snPOSInfoEntry 33}END